Murphy by Enovation

Murphy by Enovation XM500

Request Info
Downloads
Notes
Service & Support

Features

• Adds I/o To J1939 Network

• Works With Standard J1939 Display Modules

• Wide Operating Temperature Range

• Industry Standard Deutsch Enclosure and Connectors

• Custom Programming Available

• Easy-to-Use Configuration Tool Available

Power Input: 8 to 32 VDC

Operating Temperature: -40 to 85°C (-40° to 185°F)

Digital Inputs: 4– Ground or battery positive activation

Digital Outputs*: 2 – Sinking (500 mA)
*(Outputs are NOT reverse polarity protected. Damage will occur if B+ is connected to the outputs. Damage incurred from improper installation is not covered under the FW Murphy limited warranty policy.)
Thermocouple Input¹: Type K and Type J
Analog Inputs²:
• 1 – battery supply voltage (dedicated)
• 7 – configurable as 0-5 VDC, 4-20 mA, resistive senders³ or used as an additional Digital Input

Speed Sensing input: Magnetic Input (2 to 120 VAC RMS from 30 to 10,000 Hz.)

Communication Ports: CAN J1939

LED Indicators:
• PWR - Power On
• COP - Computer Operating Properly
• CAN - CANbus Active

Product Weight: 10 ounces

Authorized Distributor
Genuine Parts
Service and Support

XM500 Bulletin
PDF File ( 771.579 KB )

Electrical

Power Input: 8 to 28VDC
Communication Ports: CAN J1939
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Digital Inputs: 4 - Ground or battery positive activation
Digital Outputs*: 2 Sinking (500 mA)
Product Weight: 10 ounces
Shipping Weight: 12 ounces
Shipping Dimensions: 4” x 6” x 2”
*(Outputs are NOT reverse polarity protected. Damage will occur if B+ is connected to the outputs. Damage incurred from improper installation is not covered under the Murphy limited warranty policy.)
Thermocouple Input¹: Type K and Type J
Analog Inputs²:
- 1 - Battery Supply Voltage (dedicated)
- 7 - Configurable as 0-5VDC, 4-20mA, resistive senders³ or used as an additional digital input
Speed Sensing Input: Magnetic pickup (2 to 120VAC RMS from 30 to 10,000 Hz)

¹When the thermocouple input is used, only 5 resistive, 4-20 mA, or 0-5 VDC can be used instead of 7.

²Analog inputs can be exchanged for digital inputs (battery ground activation only) for a total of 11 digital inputs.

³Other resistive senders can be supported. Contact Murphy’s Industrial Panel Division for programming charges.

Authorized Distributor

Palmer Johnson is an authorized distributor and service provider for Murphy by Enovation products.

All Murphy by Enovation Products

All Gauges & Panels

Genuine Parts

Thousands of parts ready to ship in as little as two hours from our store at shop.pjpower.com.

Show In-Stock Parts

Service and Support

Seven master rebuild centers, ten full-service centers, and an extensive dealer network to serve you.