Murphy's PowerCore® TEC-10 panel provides full control with easy setup and installation.
A superior turnkey electronic controller, the PowerCore® TEC-10 panel provides full control of your engine including auto start/stop, auto throttling and display of engine parameters along with critical faults from the engine/application. The TEC-10 supports SAE J1939 CAN protocols for electronically governed engines as well as analog sensors on mechanical engines for fault and safety warnings/shutdowns. The TEC-10 can also be remotely automated and monitored using the Murphy CONNECT telematics unit.
- Authorized Distributor
- Genuine Parts
- Service and Support
Interface
- Display :
- Monochrome HR-TFT
- 2.7 in./ 68 mm, WQVGA (400 x 240 pixels)
- Languages: English, Spanish, German, French, Italian
- (3) LEDs : green (mode), yellow (warning) and red (shutdown)
- Operator controls :
- (11) Raised silicone keypads, tactile feedback
- (1) Rotary switch, power on/off
- (1) Push-switch (red), engine stop
Power Supply:
- Operating Voltage : 8-32 VDC, reverse battery polarity and load dump protected
- Cranking Power Holdup : 0 VDC up to 50 mS(also good for brownout/blackout instances)
- Current consumption : Power on in stopped state; 117 mA at 12 VDC. Power on in standby mode; 52 mA at 12 VDC.
Inputs (9):
- (5) Digital, configurable (active on High, Low, Open)
- (3) Analog, configurable (4-20 mA, 0-5V, resistive or digital ground)
- (1) Frequency, supporting: Magnetic pickup (30 Hz - 10 kHz, 2.0 VAC-120 VAC) and Engine Alternator (30 Hz - 10 kHz, 4.5 VRMS - 90 VRMS)
Outputs (8):
- (2) Relay, switched + DC, 10A
- (1) Relay, Form C (dry / volt-free), 10A
- (2) Low-side FET (– DC), 1A
- (2) High-side FET (+DC), 1A
- (1) Dedicated Alternator Excitation, + DC, 1A
Communications:
- (1) CAN: J1939
- (1) RS485: Modbus RTU
Mating Connectors:
- 21 Position, Deutsch HDP26-24-21SE,
- 31 Position, Deutsch HDP26-24-31SE
Physical/Environmental:
- Enclosure material : Polycarbonate
- Dimensions (WxHxD) : 9.59 x 7.34 x 5.20 in. (243.48 x 186.5 x 132.23mm)
- Weight : 4 lbs (1.8 kg)
- IP rating : IP67
- Operating Temperature : -40° to + 85° C (-40° to 185° F)
- Storage Temperature : -40 to + 85° C (-40° to 185° F)
- Vibration : 7.86 Grms (5-2000 Hz), 3-axis random
- Shock : ± 50G, 3-axis
Authorized Distributor
Palmer Johnson is an authorized distributor and service provider for Murphy by Enovation products.
Genuine Parts
Thousands of parts ready to ship in as little as two hours from our store at shop.pjpower.com.
Service and Support
Seven master rebuild centers, ten full-service centers, and an extensive dealer network to serve you.